CHANGE LOG FOR VERSION 1.3
ALL CARS
PHYSICS: corrections at the upshift and downshift algorithm to force the driver for more precisely gear changes
PHYSICS: clutch becomes slippy when you incorrectly shift gears during acceleration in the high rpm range
PHYSICS: reworked rain tires
PHYSICS: AI will not choose the rain tire in the practice/race sessions anymore
PHYSICS: some improvements at the setup menu ( range, step, min and max values )
PHYSICS: unique wear curve for the rain tire
PHYSICS: added camber lut table for all cars ( strut, double wishbone, life axle )
PHYSICS: add the parameter [VIRTUAL_KM] to all tyres.ini for calculate the accurate wear.
Now you'll have tyres on the more loaded side of the car wear differently than the one on the inside
PHYSICS: increase tire grip for new tires to 98% ( before 96.5), 100% grip at [VIRTUAL_KM]=1
PHYSICS: more stable tire at higher temperatures
PHYSICS: add the parameter [EXPLOSION] to all tyres.ini. At 180 Celsius, the tyres will blow
PHYSICS: corrections at the rim radius and tire width
PHYSICS: optimizing the collision model
PHYSICS: corrections of the LINEAR_STEER_ROD_RATIO
GRAPHICS: added smoke exhaust for each car ( when using the shader patch )
GRAPHICS: decrease headlight brightness in cockpit view for night session
GRAPHICS: reduced the OnBoard_Exposure to 16
GRAPHICS: same value for the exposure value for the dash cam
GRAPHICS: new shader for headlight glass
GRAPHICS: reworked driver model arm animation during shifting sequences
SOUNDS: fixed wrong distance parameters
RMT 121 1/2
The new RMT 121 "Flachbau" Model 1979.
RMT 121 3
The new RMT 121 "Flachbau" Model 1980.
RMT 120 1/2
GRAPHICS: fixed the banner bug
GRAPHICS: fixed the wiper animations
PURIANO 1H 1/2
SOUND: fixed missing sound files
PURIANO 3H 1/2
PHYSICS: increase FFB-Multi
GRAPHICS: view through the rear air intake fixed
GRAPHICS: fixed the banner bug
GRAPHICS: fixed the wiper animations
RMT 1001 1/2
PHYSICS: set the STEER_ASSIST to 1.0 ( old value 0.8 )
GRAPHICS: fixed the wrong livery logo skins RC_89
RMT 1N
PHYSICS: reworked aerodynamics of the body
PHYSICS: adjustments of gear ratio, final ratio, tire load, break torque, engine, power and car weight (please check your saved setup)
PHYSICS: close the gap to the other DIV 1 cars and make the 1N more driveable
GRAPHICS: fixed the damaged mapping in the cockpit wires
GRAPHICS: fixed the banner bug
GRAPHICS: fixed the wiper animations
CARMA 1/2
PHYSICS: improvements for the optimal brake temp window
PHYSICS: little more brake torque
PHYSICS: modified front tyre
PHYSICS: more bhp
GRAPHICS: texture improvements
GRAPHICS: fixed the banner bug
MAROD AERO
PHYSICS: due to the rear life axle, the options in the setup for toe and camber has been removed.
GRAPHICS: fixed this banner bug
MAROD SCREAM
PHYSICS: corrected the different min and max value for the spring in the setup menu
PHYSICS: due to the rear life axle, the options in the setup for toe and camber has been removed.
PHYSICS: modfified steering rod position
GRAPHICS: fixed the damaged mapping in the cockpit wires
GRAPHICS: fixed the wiper animations
LARDO MONASTIR 1
PHYSICS: corrected weight (found the correct technical data )
PHYSICS: decrease brake torque
GRAPHICS: switch the engine 2D texture into a 3D model for the LOD C
GRAPHICS: fixed the banner bug
LARDO MONASTIR 2
PHYSICS: 0,1 bar more turbo boost
PHYSICS: modified power curve and rpm limit
PHYSICS: harder suspension basic setup ( please check your saved setup)
PHYSICS: decrease brake torque
PHYSICS: final drive shorter from 3.6 to 3.7 (please check your saved setup)
PHYSICS: corrected weight (found the correct technical data )
GRAPHICS: witch the engine 2D texture into a 3D model for the LOD C
GRAPHICS: fixed the banner bug
YAMAMOTO DELIKATA 1/2
PHYSICS: due to the rear life axle, the options in the setup for toe and camber has been removed.
GRAPHICS: reworked aluminium steeringwheel texture
GRAPHICS: fixed the banner bug
